My RV10 Tool Kit Contents from Isham Tools (Planetools.com)

  • Pneumatic Rivet Squeezer*
  • 3″ C-Yoke Installed on Squeezer*
  • Adjustable Set Holder for Pneumatic Squeezer – Optional*
  • I upgraded the Sioux Replica Drill AWESOME!!  3600 RPM Palm Air Drill, fast, smooth & quiet like Sioux* (Sioux Drill optional)
  • 3X upgraded Rivet Gun with excellent teasing trigger (black model in our rivet gun category)*AWESOME
  • EZ change spring for straight rivet sets*
  • EZ Change Spring for flush sets (Snap-On Ind U.S.A.)*
  • Swivel and Air Flow Valve with fine precision adjustment*(HATED THIS)
  • 1″ Diameter Flush Rivet Set (Snap-On U.S.A.)*
  • 3/32″ Cupped Rivet Set 3.5″ long (Snap-On U.S.A.)*
  • 1/8″ Cupped Rivet Set 3.5″ long (Snap-On U.S.A.)*
  • 3/16″ Cupped Rivet Set 3.5″ long (Snap-On U.S.A.)*
  • 1/8″ Double Offset Rivet Set (Snap-On U.S.A.)*
  • Back Rivet Set* (Special cut on one edge for close edge work on RV parts)
  • Tungsten Bucking Bar *
  • Microstop Countersink Unit, needle-bearing, non-chattering with nylon foot
  • #40 Countersink Bit, 3/32″ (Snap-On U.S.A.)*
  • #30 Countersink Bit, for 1/8″ & #6 Screw (Snap-On U.S.A.)*
  • #8 Countersink Bit, #8 Screw (Snap-On U.S.A.)*
  • #10 Countersink Bit, #10 Screw (Snap-On U.S.A.)*
  • Left Cut Snips, easy to use offset type (Klein Tools U.S.A.)*
  • Right Cut Snips, easy to use offset type (Klein Tools U.S.A.)*
  • Straight Cut Snips, easy to use offset type (Klein Tools U.S.A.)*
  • #40 Aviation Cobalt Drill Bits for 3/32″ rivets, 8 each
  • #30 Aviation Cobalt Drill Bits for 1/8″ rivets, 6 each
  • #27 Aviation Cobalt Drill Bit
  • #21 Aviation Cobalt Drill Bit
  • #19 Aviation Cobalt Drill Bit
  • #12 Aviation Cobalt Drill Bit
  • 1/4″ Aviation Cobalt Drill Bit
  • 12″ Aviation Extra Long #40 Drill Bit
  • 12″ Aviation Extra Long #30 Drill Bit
  • Deburr Tool, Speed Handle Type for small & large holes (U.S.A.)*
  • Cleco Pliers*
  • 4 Cleco Clamps, 1/2″ (Calif Assoc Prod or Zephyr U.S.A.)*
  • 4 Cleco Clamps, 1″ (Calif Assoc Prod or Zephyr U.S.A.)*
  • Pop Rivet Tool, Professional Heavy-Duty unit with Swivel Head*
  • 3/32″ Universal Cupped Squeezer Set (Snap-On U.S.A.)**
  • 1/8″ Universal Cupped Squeezer Set (Snap-On U.S.A.)*
  • 5/32″ Universal Cupped Squeezer Set (Snap-On U.S.A.)**
  • 3/16″ Universal Cupped Squeezer Set (Snap-On U.S.A.)*
  • Flat Squeezer Set 1/8″, 2 EACH (Snap-On U.S.A.)*
  • Flat Squeezer Set 1/4″ (Snap-On U.S.A.)*
  • Flat Squeezer Set 3/8″ (Snap-On U.S.A.)*
  • 3/32″ Rivet Dimple Die (Springback U.S.A.)*
  • 1/8″ Rivet Dimple Die (Springback U.S.A.)*
  • 5/32″ Dimple Die**
  • 3/16″ – #10 Screw Dimple Die*
  • #8 Screw Dimple Die*
  • #6 Screw Dimple Die**
  • Squeezer Set Organizer*
  • Squeezer Set Adjustment Washers *
  • Stainless Steel Rule, 12″*
  • Unibit 1/4″ – 3/4″ Step Drill *
  • 3 Permanent Markers, Sharpie
  • 3M Cut & Polish Wheel 6″ (3M U.S.A.)
  • 1/2 x 1 Reducers for 3M Wheel*
  • 325 Cleco Fasteners, 3/32″ (Calif Assoc Prod or Zephyr U.S.A.)*
  • 175 Cleco Fasteners, 1/8″ (Calif Assoc Prod or Zephyr U.S.A.)*
  • 10 Cleco Fasteners, 5/32″ (Calif Assoc Prod or Zephyr U.S.A.)*
  • 10 Cleco Fasteners, 3/16″ (Calif Assoc Prod or Zephyr U.S.A.)*
  • Edge Deburring Tool, Hex Swivel type*
  • 2013 Updated High-Leverage Fluting Pliers*
  • Air Tool Oil (excluded on air shipments)
  • Drill Stop Set of 4*
  • Rivet Set DOTS, Easier than Rivet Tape
  • 3/32″ Pop Rivet Dimple Die, Springback (U.S.A.)*
  • 1/8″ Pop Rivet Dimple Die, Springback (U.S.A.)*
  • Hand Seamer (Klein Tools U.S.A.)*
  • 3/32″ Drive Pin Punch (Klein Tools U.S.A.)*
  • 1/8″ Drive Pin Punch (Klein Tools U.S.A.)*
  • Scotch Brite Hand Pads, 4 each
  • Rivet Length Gauge*
  • Rivet Shop Head Gauge, 4-piece*
  • Technical Resource Manual
  • * = Lifetime Warranty
  • QB “Quick Build” kit has 1/2 the Cleco Fasteners.
  • RV-10 Option adds 175 3/32″ Cleco Fasteners and 75 1/8″ Cleco Fasteners, Special Bucking Bar and additional Squeezer Sets**.

Extra Tools

  • Quincy Compressor
  • Porter Cable Tabletop Vertical/Disk sander (cuts aluminum fast!)
  • Grizzly Bandsaw
  • Porter Cable tabletop grinder
  • Wilton Table Top vice (added soft jaws)
  • Homedepot Folding 2×4 tables
  • some 3.32 rulers
  • couple shop lights
  • different cleco pliers that stay sprung open
  • different debur tool form Cleveland
  • Digital calipers from Harborfreight
  • plastic storage boxes to put nut/bolts/Rivets, etc for plane
  • shorter 30 and 04 droll bits (true aircraft drill bits are 12″ long which come in the kit)
  • Hearing protection
  • DA Sander and Hook and loop brillo pads
  • Paint gun for priming (harbor freight if you want